Smart Joint FM-2250 butt fusion machine is applicable to the butt fusion jointing of PE and PP plastic pipe between dn2250,Its solid, compact structure, easy to carry, is the ideal equipment for large diameter PE, PP plastic pipe connection.
The base framework adopts the structure of two clamps, which leads to the accurate positioning of the pipe. Adjusting eight locking bolts on the clamps can calibrate the jointing ends of the pipe conveniently.
The hydraulic system is fixed on the base machine. The accurate welding pressure is set up through the pressure regulation valve. The hydraulic system is installed accumulator that enables the pressure to be extremely stable.
The planning tool adopts the hydraulic pressure as the motive source, its unique radial cutting mode makes the planning tool smart, light and easy manipulated.
The Heating plate adopts the automatically electronic temperature controlling instrument and supply with the electricity through alternating current, therefore making Heating plate work moreaccurate, more credible and more universal.
In order to reduce the purchase cost of the machine as much as possible, the welding machine adopts traditional manual assembly for the pipe clamping function. Pls see trapezoidal bolt on the photo.
In order to reduce the requirements for the operator's skills and make the parameters of the welding process traceable, the welding process control adopts automatic control, which can automatically complete each welding process after inputting welding pressure, welding temperature and bead forming time. Sequential control of time nodes, and recording, storage, and printing of welding parameters in this process, corresponding to this welding joint number, constitutes a complete traceability chain.
It is also based on safety considerations, in addition to the design of the near stage operation screen is also equipped with a remote operation handle, which can easily start or stop the welding process.
| Brand |
Smart Joint |
| Model |
FM--2250 |
| Machine upper clamps locking mode: |
trapezoid bolt, manual lock, with thrust bearing |
| Hydraulic cylinder travel mode |
Engineering hydraulic cylinder |
| Applicable materials |
PE,PP,PVDF |
| Welding range |
1800-2250 mm |
| Inserts |
1800,2000mm |
| Use ambient temperature |
-5~40ºC |
| Voltage |
380V±10 % |
| Frequency |
50 Hz |
| Total power |
93 kW |
| Heating plate power |
75 kW |
| Facer power |
11.5 kW |
| Hydraulic station power |
5.5 kW |
| Maximum working pressure |
16 MPa |
| Total section area of oil cylinder |
157.08 cm2 |
| Maximum displacement of oil pump |
25 L/min |
| Hydraulic fluid |
40~50(kinematic viscosity)mm2/s, 40ºC) |
| Maximum operating temperature of the heating plate |
250ºC |
| Temperature departure |
±10ºC |
| Main control unit |
The PLC controller can store and print the welding parameter information during the welding process |
| Main frame |
outline dimension |
3500*2200*2600mm |
| |
gross weight |
13500KG |
| Secondary frame |
outline dimension |
3500*1200*2600mm |
| |
gross weight |
2200KG |
| Milling cutter / heating plate / lift basket |
outline dimension |
3800*1600*3000 |
| |
gross weight |
4850KG |
| hydraulic pressure station |
outline dimension |
1050*540*1020mm |
| |
gross weight |
300 KG |
| Total G.W |
Total weight |
About 21 tons |
Audited Supplier 
){kind=link}
){kind=link}