Automatic Butt Fusion Machine Definition
The whole welding process is executed according to procedure which is programmed in the controlling center. The operator inputs specification of pipe and other related parameter, the machine will finish the whole welding process according to the order.
Welding parameter includes: Welding Temperature, Pressure in different welding phase.
Up to now, there is still no other way to check the quality of welding joint unless the operator destroys the joint.
Thus, to guarantee the joint quality, the only way is to implement welding regulation strictly. Automatic butt fusion machine can reduce the influence resulted from the man-made factor to the maximum extent.
Welding phase control
A: Automatically check whether the pipe is fixed well.
B: Automatically start the milling and finished the milling.
C: Automatically check the precise initial pressure.
D: Automatically control the height of fusion loop.
E: Automatically control the heat absorption time.
F: Automatically control the heating plate take-out time.
G: Automatically control the pressure increase process.
O: Automatically control the cooling process.
| Item |
AFM-250 |
AFM-315 |
| Pipe Range |
Φ 250-Φ 90 |
Φ 315-Φ 110 |
| Power Supply |
1-phase 220V 1-phase 220V |
| Heater Power |
1.8KW |
2.2KW |
| Facer Power |
1.1KW 1.1KW |
| Hydraulic Power |
0.75W |
0.75W |
| Total Power |
3.65KW |
4.05KW |
| Environ. Temp. |
-10-45 degree -10-45degree |
| Heater Temp. Rise |
20-30Min 20-30Min |
| Pressure Range |
0.3~7.6Mpa 0.3~7.6Mpa |
| Hydraulic Surface |
1298mm2 |
954mm2 |
| Standard |
TGS D2002China DVS2207-1German ISO11414International |
Audited Supplier 
){kind=link}